B-VFH-1 Multi-Zone Wireless / Wired Remote Control
3 Operation Instructions
3.1 On/Off
Press On/Off to turn unit on. Pressing once more will turn unit off.
Note: The state shown in Fig. 4 indicates the "Off" state of the unit after power on. The state
shown in Fig. 5 indicates the "On" state of the unit after power on.
3.2 Mode Setting
Under the "On" state of the unit, press Mode to switch the operation modes as the following
sequence: Auto-Cooling-Dry-Fan-Heating.
3.3 Temperature Setting
Press ▲or ▼ to increase/decrease the preset temperature. When pressing either of them
continuously, the temperature will be increased or decreased by 1 every 0.5s,as shown in Fig.
6. In the Cooling, Dry, Fan or Heating mode, the temperature setting range is 60°F~86°F.
In the Auto mode, the temperature setting is unadjustable.
Fig. 4 "Off" State
Cooling
Auto
Fig. 5 "On" State
Dry
Fan
4
Heating
Heat Controller