Table of Contents
Advertisement
B-VFH-1 Multi-Zone Wireless / Wired Remote Control
3.7 Sleep Setting
Sleep on: With unit on press Function to illuminate Sleep setting interface. Press Enter/Cancel
to confirm the setting.
Sleep off: When the Sleep function is activated, press Function to enter the Sleep setting
interface. After that, press Enter/Cancel to disable this function.
In the Cooling or Dry mode, the temperature will increase by 2°F -(1°C) after the unit runs under
Sleep 1 for 1 hr and 2°F -(1°C) after another 1 hr. After that, the unit will run at this temperature.
In the Heating mode, the temperature will decrease by 2°F -(1°C) after the unit runs under
Sleep 1 for 1 hr and 2°F -(1°C) after another 1 hr. After that, the unit will run at this temperature.
Sleep setting is shown as Fig. 10.
Turn on the unit, without
turning on sleep
Press "Function" button into
sleep
Press "Enter/Cancel" to
cancel sleep
Fig. 10 Sleep Setting
8
Heat Controller
Press "Enter/Cancel" button
to turn on sleep
Press "Function" button into
sleep
Advertisement
Table of Contents
