Heat Controller
3.8 Turbo Setting
Turbo function: The unit at the high fan speed can realize quick cooling or heating so that
the room temperature can quickly approach the setting value.
In the Cooling or Heating mode, press Function till the unit enters the Turbo setting
interface and then press Enter/Cancel to confirm the setting.
When the Turbo function is activated, press Function to enter the Turbo setting interface
and then press Enter/Cancel to cancel this function.
Turbo function setting is as shown in Fig. 11
Turn on the unit, without
turning on turbo
B-VFH-1 Multi-Zone Wireless / Wired Remote Control
Press "Function" button into
turbo state
Press "Enter/Cancel" to turn
off turbo function
Fig. 11 Turbo Setting
9
Press "Enter/Cancel" to turn
on turbo function
Press "Function" button into
turbo state