Advertisement
Quick Links
OWNER S MANUAL
REMOTE CONTROLLER
SMA/SMH Series
Design, material, performance data and components
subject to change without notice.
Please read this Owner's Manual carefully before operation.
Save this manual in a safe place for future reference.
1900 Wellworth Ave., Jackson, Michigan 49203
Ph. 517-787-2100
Fax 517-787-9341
THE QUALITY LEADER IN CONDITIONING AIR
www.heatcontroller.com
Advertisement
Related Manuals for Heat Controller SMA Series
Summary of Contents for Heat Controller SMA Series
-
Page 1: Remote Controller
OWNER S MANUAL REMOTE CONTROLLER SMA/SMH Series Design, material, performance data and components subject to change without notice. Please read this Owner's Manual carefully before operation. Save this manual in a safe place for future reference. 1900 Wellworth Ave., Jackson, Michigan 49203 Ph. - Page 2 CONTENTS 3. Set the starting & stopping time 3.1 Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START operation and the Remote Controller Specification..........signal "h" will be shown on the DIGITAL display area. You Performance Features ..............
- Page 3 Remote Controller Specification TEMP Button : Push this button to decrease the indoor temperature setting. Model UL-R51M/(C)E TEMP Button : Push this button to increase the indoor temperature setting . Rated Voltage 3.0V(Alkaline dry batteries LR03 2) MODE Selection Button: Each time the button is pressed, the Lowest Voltage of CPU 2.0V operation mode is shifted in the direction of the arrow:...
- Page 4 TIMER OFF Button: Press this button to initiate the auto-off time ON/OFF Indicator: This symbol appears when the unit is turned sequence. Each press will increase the auto-timed setting in 30 on by the remote controller, and disappears when the unit is minutes increments.
- Page 5 AUTOMATIC OPERATION DRY Operation Switch on the power and the OPERATION indication lamp on the 1. Push the MODE button to select DRY. display panel of the indoor unit starts flashing, and turns off after 2. Push the TEMP button to set the desired temperature from flashes for 6 times.