Table of Contents
Advertisement
B-VFH-1 Multi-Zone Wireless / Wired Remote Control
3.9 E-heater Setting
E-heater (auxiliary electric heating function): In the Heating mode, E-heater is allowed to be
turned on for improvement of efficiency.
Once the wired remote controller or the remote controller enters the Heating mode, this
function will be turned on automatically.
Press Function in the Heating mode to enter the E-heater setting interface and then press
Enter/Cancel to cancel this function.
Press Function to enter the E-heater setting interface, if the E-heater function is not activated,
and then press Enter/Cancel to turn it on.
The setting of this function is shown as Fig. 12 below:
Auxiliary electric heating
function will be automatically
turned on under heating
mode
Press "Function" button into
this function
Press "Enter/Cancel" button
to turn on this function
Fig. 12 E-heater Setting
10
Heat Controller
Press "Enter/Cancel" button
to turn off this function
Press "Function" button into
auxiliary electric heating
function
Advertisement
Table of Contents
