Heat Controller, Inc. Remote ContRolleR Owner’s Manual Remote Controller Specifications R51D/BGE, R51K/BGCE, R51K1/BGE, R51K1/ Model* BGCE Rated Voltage 3.0V Lowest Voltage of CPU Emitting Signal 2.0V Reaching Distance 26'3" (8m) Environment Temperature Range -41°F~140°F (-5°C~60°C) *NOTE: Temperature setting display: Celsius scale (°C): R51K/BGE, R51K/BGCE;...
Owner’s Manual Remote ContRolleR Heat Controller, Inc. Remote Controller Display Indicators LOCK (heat pump only models): This is displayed by pushing the LOCK button. Push the LOCK button again to clear display. LOCK prevents the current settings from being changed.
Heat Controller, Inc. Remote ContRolleR Owner’s Manual operation Instructions 1. Install/Replace Batteries • • If you do not use the remote controller for an extended period of time, remove the batteries. Otherwise battery leakage may damage the remote controller. •...
Owner’s Manual Remote ContRolleR Heat Controller, Inc. 3. COOL, HEAT and FAN ONLY Operation A. If the AUTO mode is not desirable, manually override the settings by using COOL, DRY, HEAT (heat pump models only), or FAN ONLY modes. B. Press the TEMP button to set the desired room temperature from 70°F (21°C) to 82°F (28°C).
Page 7
Heat Controller, Inc. Remote ContRolleR Owner’s Manual 6. Setting the timer to stop the unit’s operation 7. Set the STARTING & STOPPING time • •...
Page 8
Owner’s Manual Remote ContRolleR Heat Controller, Inc. TEMP Button ▼: Push the TEMP button to decrease the indoor temperature setting or to adjust the TIMER in a counter-clockwise direction. MODE Select Button: Each time you push the button, a mode is selected in a sequence that...
Heat Controller, Inc. Remote ContRolleR Owner’s Manual Warning • Be sure there are no barriers between the remote controller and the receiver of the indoor unit, otherwise the air condi- tioner may not receive the signal from the remote. • Keep the remote controller away from all liquids.