Test Pattern Printing; Test Pattern Print Procedure - Ricoh RN-MF2 Field Service Manual

6. Troubleshooting
4. Press the "Up" or "Down" keys to select "Test Page" and then press the "OK" key.
5. Press the left key "Yes" of the "Selection keys" to print the test page to preview the settings.
• Test page sample

Test Pattern Printing

Follow the test pattern print procedure below to print a test pattern.

Test Pattern Print Procedure

1. Enter the "Maintenance Mode".
2. Select "Engine Maintenance", and then press "OK" key.
3. Select "Test Pattern", and then press "OK" key.
4. The following three test pattern pages (Checker flag/ Grid pattern/ Trimming pattern) are printed.
• Test pattern samples
144