Fax Service Test Menu; Entering The Fax Service Test Menu; Selecting An Item; Going Into The Next Level/ Returning To The Previous Level - Ricoh RN-MF2 Field Service Manual

Factory Default
Factory Default
CTL Maintenance
PDL Mode
FW Update Mode

Fax Service Test Menu

Entering the Fax Service Test Menu

Turn on the machine while pressing the "Fax" key.

Selecting an Item

To select the item, press the "Up" or "Down" key.

Going into the Next Level/ Returning to the Previous Level

• To go into the next level of an item, select an item then press the "OK" key.
• To return to the previous level of an item, press the "Escape" key.
Return Does not execute anything. Returns to an upper level.
Resets all the settings to factory default.
• Clears/ resets the contents of the controller
Execute
After executing, initial setup menu starts after power-
on.
ON = "PDL Settings" is shown (Default)
OFF = "PDL Settings" is hidden
If updating the machine that the LDAP authentication is set, execute this
mode.
[Execute/ Return]
After pressing "Execute", the display shows "Please Restart Machine...."
Turn the machine's main power off, and then on. Then the machine
activates as a special boot loader mode. After that update the firmware via
USB cable.
board memory (all data programmed by the
user, log data) to factory default.
Service Program Mode
121