Parameters - Mitsubishi FR-A500 Series Instruction Manual

CHAPTER 4

PARAMETERS

This chapter explains the "parameters" of this product.
The inverter is designed to perform simple variable-speed
operation with the factory settings of the parameters. Set
the necessary parameters according to the load and
operation specifications.
Always read the instructions before using the equipment.
4.1 Parameter List ......................................................... 58
4.2 Parameter Function Details...................................... 66
Note: By making parameter settings, you can change the functions of contact input
terminals RL, RM, RH, RT, AU, JOG, CS and open collector output terminals
RUN, SU, IPF, OL, FU. Therefore, signal names corresponding to the functions
are used in the description of this chapter (except in the wiring examples). Note
that they are not terminal names.
Note: The settings in brackets refer to the "EC" version default settings.
4
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7