Cleaning Sprayer Exterior; Cleaning Vacuvalve - Graco 3A4803A Operation, Parts

Cleanup
15. Remove spray tip, spray tip guard, and
pump filter. Clean with appropriate
cleaning fluid (water or mineral spirits). A
soft brush can be used to loosen and
remove dried material if needed.
ti29769a
16. Use a soft cloth to clean the cup support
and cup cover.

Cleaning Sprayer Exterior

Wipe paint off the outside of the sprayer using
a soft cloth moistened with water or flushing
fluid. Do NOT submerge the sprayer.
22
This sprayer is
equipped with a
static wick that
reduces the
build-up of static
charge to
reduce the risk
of fire and
explosion.
KEEP THIS
SURFACE
CLEAN OF
OVERSPRAY.

Cleaning VacuValve

The VacuValve is an important part of your
sprayer and it should be cleaned after every
use.
1. Remove VacuValve cap from cup cover
and clean it.
2. Clean VacuValve reservoir in lid.
3. Clean VacuValve air hole. If VacuValve
air hole becomes clogged, use a paper
clip to clean the hole.
ti23372a
ti23406a
ti30635a
3A4803A