Cleaning Sprayer Exterior; Storage - Graco 16H960 Operation, Parts, Repair

Operation

Cleaning Sprayer Exterior

Wipe paint off outside of sprayer using a soft cloth
moistened with water or flushing fluid. Do NOT sub-
merge the sprayer or pump.
This sprayer is equipped
with a static wick that
reduces the build up of
static charge to reduce the
risk of fire and explosion.
KEEP THIS SURFACE
CLEAN OF OVERSPRAY.

Storage

1. Fill material cup 1/3 full with mineral spirits solvent
or dilute a 4 oz. bottle of Pump Armor concentrate
with an additional 4 oz. of water in material cup and
liner.
2. Connect cup to sprayer, put prime/pressure relief
valve to UP position.
ti19384a
3A2308A
ti19400a
ti19405a
ti19347a
3. Disengage trigger lock, turn sprayer upside-down
and trigger for approximately 10 seconds to recircu-
late material.
ti19374a
4. Reverse tip to UNCLOG position. Put prime/pres-
sure relief valve DOWN to spray position and trigger
sprayer through tip into waste area for 1- 2 seconds.
ti19370a
5. Properly dispose of used storage fluid from material
cup.
6. Recharge battery to full charge before storage. See
Charging the Battery, page 7.
7. Store sprayer indoors in a cool, dry place. Never
store sprayer with material in the cup.
ti19358a
ti19346a
ti19366a
21