Important User Information - Graco 3A4803A Operation, Parts

Important User Information

Before using your sprayer read this Owners Manual for complete instructions on proper use and
safety warnings.
Congratulations! You have purchased a high-quality paint sprayer made by Graco Inc.
This sprayer is designed to provide superior spray performance with all architectural paints
and coatings. This user information is intended to help you understand the types of
materials that can be used with your sprayer.
Before using this equipment, be sure to read and follow the information on your container
label and ask for a Safety Data Sheet (SDS) from your supplier. The container label and
SDS will explain the contents of the material and the specific precautions related to it.
Paints, coatings and clean-up materials generally fit into one of the following 3 basic
categories:
WATER-BASED: The container label should indicate that the material can be
cleaned up with soap and water. Your sprayer is compatible with this type of
material. Your sprayer is NOT compatible with harsh cleaners such as chlorine
bleach.
OIL-BASED: The container label should indicate that the material is
COMBUSTIBILE and can be cleaned up with mineral spirits or non-flammable
paint thinner. The SDS must indicate that the flash point of the material is above
100°F (38°C). Your sprayer is compatible with this type of material. Use oil-based
material outdoors or in a well-ventilated indoor area with a flow of fresh air. See
the safety warnings in this manual.
FLAMMABLE:
toluene, naphtha, MEK, lacquer thinner, acetone, denatured alcohol, and
turpentine. The container label should indicate that this material is FLAMMABLE.
Your sprayer is compatible with this type of material. Use flammable materials
outdoors or in a well-ventilated indoor area with a flow of fresh air. See the safety
warnings in this manual.
4
Important User Information
Thank You for Your Purchase!
This type of material contains flammable solvents such as xylene,
3A4803A