Flush A New Sprayer - Graco 3A4803A Operation, Parts

Flush a New Sprayer

Always start with a fully charged battery.
Refer to battery and charger information
provided.
This sprayer arrives from the factory with a
small amount of test material in the system. It
is important that you flush this material
from the sprayer before using it for the first
time. See Cleaning Fluid Compatibility,
page 28 and Static Grounding Instructions
(Oil-Based or flammable materials), page
28 for additional information when using
oil-based or flammable materials.
1. Remove cup assembly from the sprayer
by turning and pulling down.
2. Unscrew cup cover from the cup support.
3A4803A
Common Procedures
3. Make certain FlexLiner is in the cup
support.
4. Fill FlexLiner with cleaning fluid. See
Cleaning Fluid Compatibility, page 28.
ti29775a
ti23676a
ti23361a
ti23383a
25