Starting A New Job - Graco 3A4803A Operation, Parts

Start Up

Starting a New Job

When spraying flammable or combustible
materials:
•
Move entire sprayer to a well-ventilated
area and away from flammable or
combustible materials, including paints
and solvents when refilling.
•
Keep material containers covered
between cup refills.
If you are using the sprayer for the very first
time, see Flush a New Sprayer, page 25.
Strain the Paint
Previously opened paint may contain dried
paint or other debris. To avoid priming
problems and tip clogs it is advisable to strain
the paint before using. Paint strainers are
available where paint is sold. Stretch a paint
strainer over a clean pail and pour the paint
through the strainer to capture any dried paint
and debris before spraying.
12
1. Install FlexLiner in the cup support.
2. Fill FlexLiner with material. Securely
tighten cup cover onto cup support. For
proper sprayer operation lid must seal
tightly with the cup.
3. Align VacuValve on cup cover with Prime
Pump/Spray knob. Push cup assembly
onto sprayer and twist to lock.
ti26894a
ti23361a
ti29719a
ti30556a
3A4803A