Display Version Comp-Matrix - HP FlexFabric 12900 series Command Reference Manual

Field
Compatibility
Work state
Upgrade method
Upgraded slot
Upgraded chassis
Current upgrading
chassis
Previous version list
Previous software
images
Upgrade version list
Upgrade software
images
Related commands
issu load
•
• issu run switchover

display version comp-matrix

Use display version comp-matrix to display version compatibility information.
Syntax
display version comp-matrix
display version comp-matrix file { boot filename | system filename } *
display version comp-matrix file ipe ipe-filename
Views
Any view
Description
Version compatibility
:
•
Incompatible.
•
compatible.
•
Unknown—No upgrade is going on.
Operating state of the device:
•
Normal—The device is operating correctly.
•
Independent active—When you perform an ISSU, the standby MPU that is upgraded
first enters this mode.
Upgrade mode:
•
Chassis by chassis—One subordinate member is upgraded first, and then the
original master is upgraded. This mode is available only for a multichassis IRF fabric.
Upgraded cards.
Upgraded members.
Members that are being upgraded.
Software versions running on the device before the ISSU.
If you execute this command on an original standby MPU during an ISSU for an
incompatible version, the value of this field is Unknown.
Software images running on the device before the ISSU.
If you execute this command on an original standby MPU during an ISSU for an
incompatible version, the value of this field is Unknown.
Software versions to upgrade to.
If you execute this command on an original standby MPU during an ISSU for an
incompatible version, the value of this field is Unknown.
Software images used for the upgrade.
If you execute this command on an original standby MPU during an ISSU for an
incompatible version, the value of this field is Unknown.
170