User-Interface Class - HP FlexFabric 12900 series Command Reference Manual

user-interface class

Use user-interface class to enter user line class view.
Syntax
user-interface class { aux | vty }
Views
System view
Predefined user roles
network-admin
Parameters
aux: Specifies the AUX line class view.
vty: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line
class view.
Some login management commands are available in both user line view and user line class view:
A setting in user line view is applied only to the user line. A setting in user line class view is applied
•
to all user lines of the class.
A non-default setting in either view takes precedence over a default setting in the other view. A
•
non-default setting in user line view takes precedence over a non-default setting in user line class
view.
• A setting in user line view takes effect immediately and affects the online user. A setting in user line
class view does not affect online users and takes effect only for users who log in after the
configuration is completed.
This command is an older version of the line class command. It is reserved for backward compatibility
purposes. Although it has the same function and output as the line class command, HP recommends that
you use the line class command.
Examples
# Set the user connection timeout to 15 minutes in VTY line class view.
<Sysname> system-view
[Sysname] user-interface class vty
[Sysname-line-class-vty] idle-timeout 15
# In AUX line class view, configure character s as the shortcut key for starting a terminal session.
<Sysname> system-view
[Sysname] user-interface class aux
[Sysname-line-class-aux] activation-key s
[Sysname-line-class-aux] quit
# In AUX 0 line view, restore the default shortcut key for starting a terminal session.
[Sysname] user-interface aux 0
[Sysname-line-aux0] undo activation-key
Alternatively:
45