Display Memory-Threshold - HP FlexFabric 12900 series Command Reference Manual

display memory-threshold

Use display memory-threshold to display memory alarm thresholds and statistics.
Syntax
In standalone mode:
display memory-threshold [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
display memory-threshold [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays the memory alarm thresholds and statistics for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device by its slot number
and the member ID. If you do not specify this option, the command displays the memory alarm thresholds
and statistics for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number. The cpu-number argument must be 0.
Usage guidelines
For more information about memory alarms, see log information containing MEM_EXCEED_THRESHOLD
or MEM_BELOW_THRESHOLD.
Examples
# Display memory alarm thresholds and statistics.
<Sysname> display memory-threshold
Memory usage threshold: 100%
Free memory threshold:
Minor: 96M
Severe: 64M
Critical: 48M
Normal: 128M
Current memory state: Normal
Event statistics:
[Back to normal state]
First notification: 0.0
Latest notification: 0.0
Total number of notifications sent: 0
[Enter minor low-memory state]
First notification at: 0.0
Latest notification at: 0.0
Total number of notifications sent: 0
[Back to minor low-memory state]
212