Monitor Cpu-Usage Enable - HP FlexFabric 12900 series Command Reference Manual

undo memory-threshold [ chassis chassis-number slot slot-number [ cpu cpu-number ] ] usage
Default
The memory usage threshold is 100%.
Views
System view
Predefined user roles
network-admin
Parameters
memory-threshold: Specifies the memory usage threshold in percentage. The value range is 0 to 100.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command sets
the memory usage threshold for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device by its slot number
and the member ID. If you do not specify this option, the command sets the memory usage threshold for
the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number. The cpu-number argument is fixed at 0.
Usage guidelines
The device samples memory usage at an interval of 1 minute. If the sample is greater than the memory
usage threshold, the device sends a trap.
Examples
# Set the memory usage threshold to 80%.
<Sysname> system-view
[Sysname] memory-threshold chassis 1 slot 2 cpu 1 usage 80
Related commands
display memory-threshold
•
• memory-threshold

monitor cpu-usage enable

Use monitor cpu-usage enable to enable CPU usage monitoring.
Use undo monitor cpu-usage enable to disable CPU usage monitoring.
Syntax
In standalone mode:
monitor cpu-usage enable [ slot slot-number [ cpu cpu-number ] ]
undo monitor cpu-usage enable [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
monitor cpu-usage enable [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
undo monitor cpu-usage enable [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Default
CPU usage monitoring is enabled.
228