Related commands
install commit
•
install deactivate
•
install add
Use install add to decompress an .ipe file.
Syntax
install add ipe-filename medium-name:
Views
User view
Predefined user roles
network-admin
Parameters
ipe-filename: Specifies the name of an .ipe file in the root directory of the global active MPU's Flash, in
the format flash:/xxx.ipe. It can be a case-insensitive string of 1 to 63 characters and cannot contain slot
or chassis information.
medium-name: Specifies the name of a storage medium on the master's active MPU in the format storage
medium name: (for example, flash:), or the name of a storage medium on any other MPU in the format
chassism#slotn#storage medium name:, (for example, chassis1#slot1#flash:).
Usage guidelines
The software images decompressed from the .ipe file will be saved to the root directory of the specified
medium.
To view which software images are included in an .ipe file, use the display install ipe-info command.
Examples
# Decompress the .ipe file version.ipe to the Flash.
<Sysname> install add flash:/version.ipe flash:
install commit
Use install commit to commit software changes.
Syntax
install commit
Views
User view
Predefined user roles
network-admin
174