Operating the device
4.4
Calling up functions directly
4.5
Enter digits, text and special characters
30
In the basic state, 6 softkeys are arranged in the lower half
of the display. You can call up frequently used functions,
such as e.g. reconciliation or reversal with these softkeys.
►
Press the softkey on the display to call up the function.
i
You can assign the display according to your needs
(see Operating Instructions, chapter "Assigning Soft-
keys".
Digits, text and special characters are entered via the
keyboard or the display. All keys are assigned with several
characters.
You can find the following characters on one key:
• the digit and letters shown on the key, e.g. "2ABC"
• the corresponding lower case letters, e.g. "abc"
• possible Umlaute, e.g. "Ää" or special characters such
as "ß".
You can find further special characters on the key "0".
►
Press the key which shows the desired character, on
the keyboard or on the display.
The selectable characters are displayed.
►
Press the key as many times as required until the desi-
red character is marked.
The character is accepted after a short waiting period.
Installation Instructions H5000