4.2
Inserting the card
1
4.3
Laying the card on the reader
2
1
Installation Instructions H5000
►
Insert the swipe card with the magnetic strip (1) facing
2
back left into the slot from above.
i
Pay attention that the swipe card is inserted with
constant speed. Abrupt changes of speed can lead to
reading errors.
►
Insert the chip card with the chip (2) facing the display
into the slot from above.
Pay attention that the card is inserted right up to the
i
stop and is removed only after conclusion of the
transaction or after request shown on the display.
One of the contactless payment methods is activated.
LED (1) is illuminated.
►
Hold the card close to the display.
A signal sounds.
All LEDs (1 and 2) are illuminated.
Operating the device
29