Insert / Change Merchant Card - VeriFone H5000 Installation Instructions Manual

Preparing to take the device into operation
5.1

Insert / change merchant card

Preparing change of the
merchant card
32
Three chip card contacts for merchant cards (SAM slots)
are arranged in the connector compartment of the device
under a cover.
If you wish to process GeldKarten a merchant card must
be inserted into the device first. You can get the merchant
card from your bank.
i Merchant cards have a limited validity. Please pay
attention to the expiry date of your merchant card.
CAUTION
Destruction of the chip on the merchant card due to volta-
ge on the device!
► Before inserting the merchant card, separate the device
from the power supply.
► Conduct a successful reconciliation (see Operating
Instructions, chapter "Reconciliation").
► Separate the device from the power supply.
► Place the device, operating field side down, on a clean
non-slip storage surface.
► Remove the cover of the connector compartment:
– Slide the lock of the cover in arrow direction.
– Remove the cover from the connector compartment.
Installation Instructions H5000