VeriFone H5000 Installation Instructions Manual page 44

Taking the device into operation
6.3.2 Setting up ISDN / Modem connection
Determine external line
automatically
Enter external line code
44
► Select the corresponding setting:
– Yes: the parameters for the external line are set inde-
pendently.
– No: follow the further points.
A setting is not required in the case of a direct
i
telephone exchange line.
In the case of telephone PABX systems you must get
the exchange/ lines through a character which is dialled
before the number. Usually this is the "0" as external
line code. In addition, it may be necessary to set waiting
times with the character "-".
► Select the corresponding setting:
– Yes: External line code required (telephone PABX
system)
– No: External line code not required (direct telephone
exchange line)
With selection Yes: The external line code is set automati-
cally to "0-". You can also change the external line codes.
► Delete the automatically set external line codes.
► Enter the external line code.
► Confirm the entry.
The entry of digits, letters or special characters required
for the external line is described in chapter
text and special characters on page
4.5 Enter digits,
30.
Installation Instructions H5000