Playing Back Xg Songs - Yamaha Electone STAGEA ELB-02 Owner's Manual

Reference Page
Converting to XG format
(page 166)
Reference Page
Playback Settings
(page 136)
6
160
ELB-02 Owner's Manual
4
Press the [PLAY/PAUSE] button to begin playback.
To cancel the repeat setting, select "OFF" for the repeat mode.

Playing Back XG Songs

                                     
The Electone allows you to playback XG Song data, created on the computer or
converted from Electone Song format to XG format. Naturally, you can use the fast
forward, rewind and pause controls, just as with Songs (performances) recorded on
the Electone.
1
Connect the compatible USB flash drive containing the XG song
data to the [USB TO DEVICE] terminal.
2
Press the [MDR] button, then select the desired Song for playback.
For details on selecting a Song, see steps 2 and 3 on page 135.
3
Press the [C] "SET." Button, then press the Page buttons to select
the PART Page.
You can set the volume or mute settings for each part.
1 Part
Select the desired channel "CH1" through "CH16" or "ALL" to specify the part to mute/
play or to change the volume.
Press the [A] button to select "XG PART CH, " then use the DATA CONTROL dial to
select the setting.
2 Playback/Off
Sets the selected part for playback or mute (off). Select "PLAY" for the part you want to
play back and select "OFF" for the part you want to mute. Press the [B] button to select
"XG, " then press the same button successively to select the setting.
3 Volume
You can adjust the volume for the selected part within a range of 0 – 100.
Press the [C] button to select "XG VOLUME, " then use the DATA CONTROL dial to
select the setting.
When the selected Song contains an XG part, you can adjust the XG part on/off
setting and volume from Page 3, in the same way as you did with the XG Songs.
1
2
3