Yamaha Electone STAGEA ELB-02 Owner's Manual page 194

10
194
ELB-02 Owner's Manual
Displaying available networks in the wireless LAN and
connecting to a network
1
Set the Wireless LAN mode to "INFRASTRUCTURE."
Refer to "Wireless LAN Mode" on page 197.
2
Connect the USB wireless LAN adaptor, then call up the Wireless
LAN display.
Press the [UTILITY] button, then use the Page buttons to select Page 6.
3
Press the [A] "UPDATE" button to call up the network list.
For a network with a lock icon (
4
Connect the instrument to the desired network.
4-1
Select the desired network by using the DATA CONTROL dial, then
press the [C] "CNCT." (Connect) button.
The name of the selected network will be fully shown in the display, letting you
confirm this is the network you want to use.
4-2
Press the [C] "CNCT." (Connect) button.
• For a network without a lock icon:
Connecting starts.
• For a network with a lock icon (
You need to enter the proper password. For details on how to enter characters,
refer to the "Changing the Song/Folder Name" on page 144. After entering the
password, press the [D] button to finalize the setting. This operation starts
connecting automatically.
Appears when connection between the instrument and
WIRELESS LAN Display
Network list
), you need to enter the proper password.
):
the access point is done successfully.