Keyboard Percussion; Using The Preset Keyboard Percussion - Yamaha Electone STAGEA ELB-02 Owner's Manual

NOTE
On/Off status of the Voices
(page 31)
4
NOTE
Two Keyboard Percussion
sets, [1] and [2], can be
played at the same time by
setting both buttons to on.
88
ELB-02 Owner's Manual
7

Keyboard Percussion

The Keyboard Percussion function provides many different drum and percussion
sounds, playable from the keyboards and Pedalboard. Keyboard Percussion has two
different modes, Preset and User. Preset Keyboard Percussion lets you play the preset
drum kit sounds from the keyboards (assigned beforehand to the keys), while the
User Keyboard Percussion lets you freely assign the drum sounds to any key or pedal
you wish.

Using the Preset Keyboard Percussion

                                     
1
Turn off the Upper, Lower and/or Pedal Voices by setting each
Voice's volume to MIN.
2
Turn on the Keyboard Percussion function by pressing the
Keyboard Percussion [1] or [2] button. Press the [1] button to play
Percussion sounds on the Upper/Lower keyboards, and press the
[2] button for the Pedalboard.
The Keyboard Percussion (KBP) display appears.
Pressing the Keyboard Percussion [1] button calls up the Preset 1 kit on the
Upper/Lower keyboards, and pressing [2] button calls up the Preset 2 kit on the
Pedalboard.
3
Select the desired percussion kit.
You can select a kit from a total of 22 different kits.
Press the [B] button to select "KIT, " then use the DATA CONTROL dial to
select the kit.
KBP Display