Recalling The User Keyboard Percussion - Yamaha Electone STAGEA ELB-02 Owner's Manual

4
104
ELB-02 Owner's Manual
To erase all instruments:
You can clear all assignments in ASSIGN Page of the Keyboard Percussion display.
1
Press, then release the [D] "CLR." (CLEAR) button in the display.
The following display appears, prompting confirmation of the operation. You
can cancel the operation at this point by pressing the [D] button corresponding
to "CANCEL. "
2
Press the [C] "CLR." (Clear) button to erase all data. When the [C]
button is pressed, an "Assignments of User xx have been cleared"
message momentarily appears on the display.

Recalling the User Keyboard Percussion

                                     
1
Press the Keyboard Percussion button.
2
Select the desired User Keyboard percussion kit.
Press the [A] button to select "MENU, " then use the DATA CONTROL dial to
select the desired User number.
Play some notes on the keyboards and/or Pedalboard.