Yamaha Electone STAGEA ELB-02 Owner's Manual page 141

3
Select the parts for recording.
In this case, set the Lower Keyboard (LOWER) and Pedalboard (PEDAL) to
"RECORD, " while other parts to "OFF. "
PART 1 Page
Each press of the [A] – [C] button corresponding to the desired part in the
display toggles the status among PLAY, OFF and RECORD. Turn off the parts
you don't want to record, and make sure "PLAY" is selected for the parts you
want to play and "RECORD" for the part you want to record.
PLAY:
Playback of parts that have been recorded.
OFF:
Recording or playback is not active.
RECORD: Recording of the part.
If you set the UPPER part to "REC, " the performance on the Upper Keyboard
(including Lead Voice 1 Voices) is recorded. Setting LEAD to "REC, " however,
records only the Lead Voice 1 Voices. You cannot set both Upper and Lead to
"REC" at the same time; neither can the LOWER and KBP (Keyboard
Percussion) parts be recorded at the same time.
4
Press the [PLAY/PAUSE] button. After "00:00" appears at the
bottom left of the LCD display, begin playing.
5
Press the [STOP] button when you are finished with your
performance to stop recording.
Now you've recorded the first parts of your performance.
Setting up recording of the next part—Upper part in this case.
6
Press the [RECORD] button.
A message appears prompting confirmation of operation. To overwrite, press
the [C] "OVERWRITE" button.
7
Select the PART Page with the Page buttons, then select the parts
for recording.
Set the parts you want to record next (in this case, the Upper part) to "REC. "
Also set the part already recorded (in this case, the Lower and Pedal parts) to
"PLAY, " so that you can hear the previously recorded parts as you record new
ones.
PART 2 Page
NOTE
You should also set the
CONTROL to "REC," in order
to record Registration
changes and expression
pedal operation.
NOTE
When you record the
Keyboard Percussion, make
sure that the KEYBOARD
PERCUSSION [1] button is
set to on.
141
ELB-02 Owner's Manual
6