Quick Introductory Guide; Power Supply; Turning On/Off The Power - Yamaha Electone STAGEA ELB-02 Owner's Manual

Quick Introductory Guide

WARNING
Use only the supplied
power cord.
CAUTION
When setting up the
product, make sure that
the AC outlet you are using
is easily accessible. If
some trouble or
malfunction occurs,
immediately turn off the
power switch and
disconnect the plug from
the outlet.
NOTE
When disconnecting the
power cord, first turn off the
power, then follow this
procedure in reverse order.
NOTICE
Do not press any keys or
buttons while turning the
power on. Doing so may
cause the Electone to
malfunction or data loss.
16
ELB-02 Owner's Manual
1

Power Supply

Connect the plugs of the power cord in the order shown in the illustration.
1
[AC IN] jack
(page 13)
2

Turning On/Off the Power

1
Turn down the [MASTER VOLUME] dial counter-clockwise.
2
Press the [ ] (Standby/On) switch to turn the power on.
P
2
AC Outlet
The shape of the
plug and outlet
differs depending
on your locale.