Preset/User Keyboard Percussion - Yamaha Electone EL-100 Owner's Manual

7
Preset/User Keyboard
Percussion
The keyboard Percussion function features a total of 120 different drum
and percussion sounds, playable from the keyboards and pedalboard.
The Keyboard Percussion has two different modes, Preset and User. Preset
Keyboard Percussion lets you play 43 different sounds from the Lower
keyboard and Pedalboard, while the User Keyboard Percussion lets you
freely assign the 120 available sounds to any key or pedal you wish.
1) To use the Preset Keyboard Percussion:
1
4 Turn off the Lower and/or Pedal voices by setting each voice's volume
to MIN.
2
Turn on the Keyboard Percussion function by pressing the LOWER/1
and/or PEDAL/2 buttons in the KEYBOARD PERCUSSION section
on the left side of the panel.
DATA CONTROL
3
Set the volume.
The volume of the percussion sounds is set together with that of the
rhythm volume.
SEQ.
SEQ.
4
Play some notes on the Lower keyboard and/or Pedalboard. The 43
percussion sounds have been assigned to the keyboards as shown in the
chart below.
56
KEYBOARD
PERCUSSION
LOWER
PEDAL
<KBP1>
"LK PRESET 'USER1
RHYTHM
SEQ. MARCH WALTZ SWING
1 2
SEQ. TANGO LATIN LATIN
3 4 1 2
DATA CONTROL
BOUNCE SLOW
MAX
ROCK
8 BEAT 16 BEAT
MIN
NOTE:
Pressing the KEYBOARD PERCUSSION
button call up the Menu display. You can
select from Preset (LK/PK preset) or User
(one of the eight Users you created). LK
Preset/PK Preset is selected as the
defaults. If not, select the Preset.