Debug Platform Acl - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:
Table of Contents

Advertisement

Appendix B
Catalyst 3750 Switch Debug Commands

debug platform acl

Use the debug platform acl privileged EXEC command to enable debugging of the access control list
(ACL) manager. Use the no form of this command to disable debugging.
Syntax Description
all
exit
label
main
racl
stack
vacl
vlmap
warn
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
The undebug platform acl command is the same as the no debug platform acl command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands
Command
show debugging
78-16181-03
debug platform acl {all | exit | label | main | racl | stack | vacl | vlmap | warn}
no debug platform acl {all | exit | label | main | racl | stack | vacl | vlmap | warn}
Display all ACL manager debug messages.
Display ACL exit-related debug messages.
Display ACL label-related debug messages.
Display the main or important ACL debug messages.
Display router ACL related debug messages.
Display ACL stack-related debug messages.
Display VLAN ACL-related debug messages.
Display ACL VLAN-map-related debug messages.
Display ACL warning-related debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Catalyst 3750 Switch Command Reference
debug platform acl
B-27

Advertisement

Table of Contents
loading

Table of Contents