About Mqc; Using Modular Qos Cli - Cisco Nexus 9000 Series Configuration Manual

Using Modular QoS CLI

•
•
•
•
•
•
•
•
•
•
•

About MQC

MQC provides a language to define QoS policies.
You configure QoS policies by following these three steps:
1 Define traffic classes.
2 Associate policies and actions with each traffic class.
3 Attach policies to logical or physical interfaces.
MQC provides a command type to define traffic classes and policies:
• policy-map-Defines a policy map that represents a set of policies to be applied on a class-by-class
About MQC, page 11
System Classes, page 12
Default System Classes, page 12
Licensing Requirements for Using MQC Objects, page 13
Using an MQC Object, page 13
Attaching and Detaching a QoS Policy Action, page 32
Configuring a Service Policy for a Layer 2 Interface, page 33
Configuring a Service Policy for a Layer 3 Interface, page 34
Attaching the System Service Policy, page 35
Attaching a QoS Policy Action to a VLAN, page 36
Session Manager Support for QoS, page 38
basis to class maps.
The policy map defines a set of actions to take on the associated traffic class, such as limiting the
bandwidth or dropping packets.
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
3
C H A P T E R
11