Cisco Nexus 9000 Series Configuration Manual page 102

Configuring 1-Rate and 2-Rate, 2-Color and 3-Color Policing
Rate
mbps
gbps
Burst sizes used in the police command are described in the following Burst Sizes for the police Command
table.
Table 37: Burst Sizes for the police Command
Speed
bytes
kbytes
mbytes
ms
us
.
SUMMARY STEPS
1. configure terminal
2. policy-map [type qos] [match-first] [policy-map-name]
3. class [type qos] {class-map-name | class-default} [insert-before before-class-name]
4. police [cir] {committed-rate [data-rate] | percent cir-link-percent} [bc committed-burst-rate
[link-speed]][pir] {peak-rate [data-rate] | percent cir-link-percent} [be peak-burst-rate [link-speed]]
[conform {transmit | set-prec-transmit | set-dscp-transmit | set-cos-transmit | set-qos-transmit}
[exceed {drop} [violate {drop}]]}
5. exit
6. exit
7. show policy-map [type qos] [policy-map-name | qos-dynamic]
8. copy running-config startup-config
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
88
Description
1,000,000 bits per second
1,000,000,000 bits per second
Description
bytes
1,000 bytes
1,000,000 bytes
milliseconds
microseconds
Configuring Policing