Prerequisites for Monitoring QoS Statistics
Prerequisites for Monitoring QoS Statistics
Monitoring QoS statistics has the following prerequisites:
• You must be familiar with using modular QoS CLI.
• You are logged on to the device.
Guidelines and Limitations
• show commands with the internal keyword are not supported.
• The show queuing interface command can display information about internal interfaces.
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
152
The command format for this information is specified as ii x/y/z. Where x is the module number, y is the
value 1, and z is the internal interface number within the module.
Note
The number of internal interfaces within a module varies based on the type of the
linecard.
Note
Alternatively, you can display information about internal interfaces by providing the
module number in the show queuing command so that queuing information for both
front-panel and internal interfaces of a given module are displayed together.
Example:
switch# show queuing interface ii 4/1/2
slot
4
=======
Egress Queuing for ii4/1/2 [System]
------------------------------------------------------------------
QoS-Group# Bandwidth% PrioLevel
------------------------------------------------------------------
3
-
2
0
1
0
0
100
+-------------------------------------------------------------------+
|
+-------------------------------------------------------------------+
|
|
Unicast
+-------------------------------------------------------------------+
|
Tx Pkts |
|
Tx Byts |
|
Dropped Pkts |
|
Dropped Byts |
|
Q Depth Byts |
+-------------------------------------------------------------------+
|
+-------------------------------------------------------------------+
|
|
Unicast
Shape
Min
Max
1
-
-
-
-
-
-
-
QOS GROUP 0
| OOBFC Unicast
|
0|
0|
0|
0|
0|
0|
0|
0|
0|
0|
QOS GROUP 1
| OOBFC Unicast
|
Monitoring QoS Statistics
Units
-
-
-
-
-
-
-
-
|
Multicast
|
235775|
22634400|
0|
0|
0|
|
Multicast
|