Enabling Statistics
Enabling Statistics
You can enable or disable QoS statistics for all interfaces on the device. By default, QoS statistics are enabled.
SUMMARY STEPS
1. configure terminal
2. Enable or disable QoS statistics:
3. show policy-map interface
4. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
Enable or disable QoS statistics:
• Enable QoS statistics:
qos statistics
• Disable QoS statistics:
no qos statistics
Example:
• Enable QoS statistics:
switch(config)# qos statistics
• Disable QoS statistics:
switch(config)# no qos statistics
Step 3
show policy-map interface
Example:
switch(config)# show policy-map interface
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
154
• Enable QoS statistics:
qos statistics
• Disable QoS statistics:
no qos statistics
Purpose
Enters global configuration mode.
• Enable QoS statistics:
Enables QoS statistics on all interfaces.
• Disable QoS statistics:
Disables QoS statistics on all interfaces.
(Optional) Displays the statistics status and the
configured policy maps on all interfaces.
Monitoring QoS Statistics