Cisco Nexus 9000 Series Configuration Manual page 101

Configuring Policing
Action
set-dscp-transmit
set-prec-transmit
set-qos-transmit
Table 35: Policer Actions for Conform
Action
transmit
set-prec-transmit
set-dscp-transmit
set-cos-transmit
set-qos-transmit
Note The policer can only drop or mark down packets that exceed or violate the specified parameters. For
information on marking down packets, see the
The data rates used in the police command are described in the following Data Rates for the police Command
table.
Table 36: Data Rates for the police Command
Rate
bps
kbps
Configuring 1-Rate and 2-Rate, 2-Color and 3-Color Policing
Configuring Marking, on page 73
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
Description
Sets DSCP and transmits the packet.
Sets precedence and transmits the packet.
Sets qos-group and transmits the packet.
Description
Transmits the packet. This action is available only
when the packet conforms to the parameters.
Sets the IP precedence field to a specified value and
transmits the packet. This action is available only
when the packet conforms to the parameters.
Sets the differentiated service code point (DSCP) field
to a specified value and transmits the packet. This
action is available only when the packet conforms to
the parameters.
Sets the class of service (CoS) field to a specified
value and transmits the packet. This action is available
only when the packet conforms to the parameters.
Sets the QoS group internal label to a specified value
and transmits the packet. This action can be used only
in input policies and is available only when the packet
conforms to the parameters.
section.
Description
Bits per second (default)
1,000 bits per seconds
87