Replacing The Server Board; Removing The Server Board; Figure 35. Removing The Server Board - Intel R1304BTSSFAN Service Manual

Replacing the Server Board

Removing the Server Board

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Detach all cables connected to the server board.
7. Remove the heat sink and the processor. For instructions, see
Sink and Processor" on page
8. Remove the DIMMs. For instructions, see
9. Remove the nine screws from the server board and lift the server board from the
server system.
58
iii.
28.
30.

Figure 35. Removing the Server Board

®
Intel Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
51.
35.
"Removing DIMMs" on page
A
B
"Removing the Server
"Removing the Processor Air
"Removing the PCIe*
"Removing the Heat
33.
AF003739
"Safety