Video Settings - Crestron DM-MD8X8 Operation Manual

DigitalMedia™ Switchers

Video Settings

Audio Settings
144 DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
2. Select letters (upper and lower-case), numbers, or other characters by
turning the selection knob until the desired letter, number, or other character
is displayed on the LCD. Move the cursor to another position by pressing
the soft buttons labeled
button marked Del.
NOTE: The maximum length for any input name is 32 characters.
3. After the new name has been entered, press Done to save the name and
return to the list of options for the input card.
The DMC-SDI can display information about the video portion of the incoming
signal. To view the video settings:
1. Turn the selection knob to highlight Video Settings and press the ENTER
button.
Video Settings
Video Settings
Input Type: SDI
Video Type: Interlaced
Resolution: 1920x1080
2. Turn the selection knob to view information on input type, video type,
resolution, frame rate, and aspect ratio.
3. Press the MENU button to return to the list of options for the input card.
The DMC-SDI can display information about the audio portion of the incoming
signal. Available information includes format, frequency, and channels. To view
audio settings:
1. Turn the selection knob to highlight Audio Settings and press the ENTER
button.
Audio Settings
Audio
Format: PCM
Frequency: 48.0kHz
Channels: 2
Crestron DM-MD8X8/16X16/32X32
and . To delete a character, press the soft
Operations Guide – DOC. 6755C