Camera Settings - Crestron Automate VX Series Product Manual

Web Configuration Interface - Main Tab
To enter the system settings, select the gear icon at the top of the web configuration interface.

Camera Settings

Select the Camera tab to view the available camera settings.
Camera Tab
The following camera settings can be configured.
Select Control Protocol
Use the Select Control Protocol drop-down menu to select between Serial or IP control.
Select Control Protocol Setting
Camera COM Port
Use the Camera COM Port drop-down menu to select a COM port within the system for a Serial
camera connection.
NOTE: Ensure that a USB to RS-485 adapter is connected to an available USB port on the
system. This will allow a COM port to be exposed on this drop-down menu.
Select Control Protocol Setting
22 • IV-SAM-VXP-1B and IV-SAM-VXS-1B Product Manual — Doc. 9324A