Example Program - Crestron DM-MD8X8 Operation Manual

Crestron DM-MD8X8/16X16/32X32
Program Manager
Operations Guide – DOC. 6755C
Scenario 2: Control Center with Control System and DM switcher and
DM-RMC-100 Room Controller; Automatic IP Table Configuration
Control Center Containing Control System and DM Switcher Operating with
Classroom Containing Control System and DM-RMC-100 Room Controller
Classroom
Control Center
To configure a SIMPL Windows program for this layout, drop
DM-RMC-100-F devices onto the control system's Ethernet slot. The IP
table of each DM-RMC-100-F will require manual configuration.
Program Manager is the view where programmers "program" a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).

Example Program

Example programs for the DM-MD8X8, DM-MD16X16 and DM-MD32X32 are
available from the Crestron website (www.crestron.com/exampleprograms).
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
DigitalMedia™ Switchers
Control
Ethernet
System
Ethernet
Control
Ethernet
System
DM-RMC-100
DMNet
DM Switcher
65