Commission System - Crestron DM-MD8X8 Operation Manual

DigitalMedia™ Switchers
Open Commission System
HDCP Check
54 DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
Message Log
Message Log
System log:
3. Press the soft buttons labeled
fit on the display.
4. Turn the selection knob to scroll through the list of messages.
5. Press the MENU button to return to Installer Tools.

Commission System

The Commission System section of Installer Tools is used to manage HDCP and
EDID capabilities of sources and displays connected to the DM switcher.
To open the Commission System section of Installer Tools:
1. Open Installer Tools as described on page 41.
2. Turn the selection knob to highlight Commission System and press the
ENTER button. A list of functions will be displayed.
Commission System Functions
Commission System
HDCP Check
Data Rate Check
The switcher can test HDMI sources and displays for switching limitations due to
HDCP keys. The number of HDCP keys specify the number of display devices that
can be connected to a source over HDMI using HDCP authentication. To run an
HDCP check:
1. Open the Commission System section as described on page 54.
2. Turn the selection knob to highlight HDCP Check and press the ENTER
button.
Crestron DM-MD8X8/16X16/32X32
<< >>
and to display the data that does not
Operations Guide – DOC. 6755C