Firmware Configuration - Crestron DM-MD8X8 Operation Manual

DigitalMedia™ Switchers
Restore Defaults
About
52 DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
4. To save the setting and return to the Control section, press the ENTER
button. To cancel the operation and return to the Control section, press the
MENU button.
The DM switcher's default settings can be restored from the front panel. Restoration
can be set to restore all defaults or just the audio and video settings. To restore
default settings:
1. Open the Control section as described on page 49.
2. Turn the selection knob to highlight Restore Defaults and press the
ENTER button to display the Restore Defaults controls.
Restore Defaults Controls
Restore Defaults
Audio/Video settings only
All settings
3. Turn the selection knob to highlight the defaults to be restored and press the
ENTER button.
4. A confirmation message will be displayed. To continue restoring the default
settings, press the soft button labeled Yes. To cancel restoring the default
settings and return to the Restore Defaults control, press the soft button
labeled No.
5. To cancel the operation and return to the Restore Defaults control, press the
MENU button.
Information about the DM switcher's hardware and firmware can be viewed on the
front panel. To view information about the DM switcher:
1. Open the Control section as described on page 49.
2. Turn the selection knob to highlight About and press the ENTER button to
display the About controls.
About Controls
About
Hardware Configuration

Firmware Configuration

Crestron DM-MD8X8/16X16/32X32
Operations Guide – DOC. 6755C