Crestron DM-MD8X8/16X16/32X32
Name/Rename the Input
Operations Guide – DOC. 6755C
DMC-CAT
The front panel controls for the DMC-CAT allow the user to rename the input, adjust
the picture, and view information on the incoming source and the outgoing HDMI
signal.
DMC-CAT Controls
3. DMC-CAT Basic DM I
Name: 3
Video Settings
Audio Settings
Using the DMC-CAT controls, the user can:
Change the input name.
View details on the video portion of the incoming signal
View details on the audio portion of the incoming signal.
View details on the signal delivered to the HDMI OUT (loopback) port.
View details about the device connected to the HDMI OUT (loopback)
port.
Adjust the audio output level
Select the cable type
View EDID settings
Perform an HDCP check to determine how many endpoints can be
connected to the source
Restore the default settings.
To name and/or rename the input:
1. Turn the selection knob to highlight Name and press the ENTER button. A
cursor will appear next to the current name and controls for changing the
name will also be displayed. To cancel and return to the list of options for
the input card, press the MENU button.
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
DigitalMedia™ Switchers
91