Crestron DM-MD8X8 Operation Manual page 132

DigitalMedia™ Switchers
Restore Defaults
126 DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
Show Full EDID
Show Full EDID
Preferred Resolution
Supported Resolutions
Audio Formats
2. Turn the selection knob to highlight the data to be viewed and press the
ENTER button.
3. Press the MENU button to return to list of available EDID data.
4. Press the MENU button to return to the list of options for the input card.
Use the Restore Defaults function to reset the card to its factory settings. The card's
factory settings are:
Loopback Allow Deep Color: On
Color Space Mode: Force RGB
Enable/Disable input: Input enabled
Brightness level: 0
Contrast level: 0
Saturation level: 0
Hue level: 0
Red Level: 0
Green Level: 0
Blue Level: 0
Coarse Phase: 0
Fine Phase: 0
X Position: 0
Y Position 0
To restore the card's default settings:
1. Turn the selection knob to highlight Restore Defaults and press the
ENTER button.
2. Press the soft button labeled Yes to restore the default setting or press the
soft button labeled No to cancel and return to the list of options for the input
card.
Crestron DM-MD8X8/16X16/32X32
Operations Guide - DOC. 6755C