Message Log - Crestron DM-MD8X8 Operation Manual

Crestron DM-MD8X8/16X16/32X32
Open Message Log
Operations Guide – DOC. 6755C
3. Turn the selection knob to highlight Hardware Configuration or
Firmware Configuration and press the ENTER button.
a. For Hardware Configuration:
Hardware Configuration
Current Hardware Conf
i. Press the soft buttons labeled
does not fit on the display.
ii. Turn the selection knob to view other data.
iii. Press the MENU button to return to the About controls.
b. For Firmware Configuration:
Firmware Configuration
Frm: v4.001.002 (Oct 20 2
Prg: DM Switcher v2.1.7
Pnl: dm switcher v2.1.7
i. Turn the selection knob to view other data.
ii. Press the MENU button to return to the About controls.
4. Press the MENU button to return to the Control section.

Message Log

The Message Log section of Installer Tools contains system messages from the
DM switcher.
To open the Message Log section of Installer Tools:
1. Open Installer Tools as described on page 41.
2. Turn the selection knob to highlight Message Log and press the ENTER
button. The Message Log will be displayed.
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32
DigitalMedia™ Switchers
<< >>
and to display the data that
53