Checking The Oil Cooler - Yamaha FZ09E Service Manual

,..,....
CHECKING THE OIL COOLER
1.
Check:
• Oil cooler
Cracks/damage -> Replace.
2. Check:
• Oil cooler inlet hose
• Oil cooler outlet hose
Cracks/damage/wear-> Replace.
,......,
INSTALLING THE OIL COOLER
1. Clean:
• Mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thinner)
2. Install:
• 0 -ring l@@I
• Oil cooler "1"
• Washer
"2"
llljll![ij"'*•i
• Oil cooler union bolt
"3"
Oil cooler union bolt
35
Nm
(3.5
m·kgf,
25
ft·lbf)
TIP ~~~~~~~~~~~~~~
• Before installing the oil cooler, apply engine oil
lightly to the oil cooler union bolt and apply lith-
ium-soap-based grease to the 0 -ring.
• Make sure the 0 -ring is positioned properly.
• Align the projection "a" on the oil cooler with the
slot "b" in the crankcase.
• After installing the oil cooler union bolt, bend
the tab "c'' of the washer.
6-5
OIL COOLER
3. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT' on
page 3-26.
• Crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to "CHANGING THE ENGINE OIL" on
page 3-23.
4. Check:
• Cooling system
Leaks -> Repair or replace any faulty part.
Refer to "INSTALLING THE RADIATOR" on
page 6-2.
5.
Measure:
• Radiator cap opening pressure
Below the specified pressure
4
Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR" on
page 6-2.