Checking The Gear Position Sensor - Yamaha FZ09E Service Manual

Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
b. Immerse the intake air temperatu re sensor
"1"
in a container filled with water
"2".
TIP ~~~~~~~~~~~~~~~
Make sure that the intake air temperature sensor
terminals do not get wet.
c. Place a thermometer "3" in the water.
3
1
2
d. Slowly heat the water, then let it cool down to
the specified temperature.
e. Measure the intake air temperature sensor
resistance.
••••••••••••••••••••••••••••••••
3. Install:
• Intake air temperature sensor
EA$1ACHllS
CHECKING THE GEAR POSITION SENSOR
1. Remove:
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Gear position sensor
Refer to "CRANKCASE" on page 5-56.
2. Check:
• Gear position sensor
Out of specification-+ Replace the gear posi -
tion sensor.
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
8-110
ELECTRICAL COMPONENTS
Result
Neutral position
Continuity
Positive tester probe
sky blue " 1"
Negative tester probe
Sensor terminal " a"
1st position
Continuity
Positive tester probe
white " 2"
Negative tester probe
Sensor terminal " b"
2nd position
Continuity
Positive tester probe
pink " 3"
Negative tester probe
Sensor terminal " c"
3rd position
Continuity
Positive tester probe
yellow/white " 4"
Negative tester probe
Sensor terminal " d"
4th position
Continuity
Positive tester probe
white/red " 5"
Negative tester probe
Sensor terminal " e"
5th position
Continuity
Positive tester probe
orange " 6"
Negative tester probe
Sensor terminal " f"
6th position
Continuity
Positive tester probe
gray " 7"
Negative tester probe
Sensor terminal " g"