Installing Th Eengine - Yamaha FZ09E Service Manual

EA$1AC 1501
REMOVING THE ENGINE
1.
Loosen:
• Engine mounting adjust bolt (front)
TIP ~~~~~~~~~~~~~~~
Loosen the engine mounting adjust bolt with the
pivot shaft wrench "1".
Pivot shaft wrench
90890-01485
Frame mount insert wrench
YM-01485
2. Loosen:
• Engine mounting adjust bolts (rear)
TIP ~~~~~~~~~~~~~~~
Loosen the engine mounting adjust bolts with
the pivot shaft wrench "1" and pivot shaft wrench
adapter
''2".
Pivot shaft wrench
90890-01518
Frame spanner socket
YM-01518
Pivot shaft wrench adapter
90890-01476
1
5-7
ENGINE REMOVAL
1
2
INSTALLING THE ENGINE
1. Install:
• Engine mounting adjust bolt (front) "1"
(temporarily tighten)
• Engine mounting adjust bolts (rear) "2"
(temporarily tighten)
2. Install:
• Engine
3 . Install:
• Engine mounting bolt (rear upper side) "3"
• Engine mounting bolt (rear lower side) "4"
4. Install:
• Adapter bolt (left) "5"
(temporarily tighten)
5. Install:
• Engine mounting bolt (left front upper side)
"6"
• Engine mounting bolt (left front lower side) "7"
• Engine mounting bolt (right front lower side)
''8"
Temporarily tighten the engine mounting bolts
6. Tighten:
• Engine mounting adjust bolt (front) "1"
TIP ~~~~~~~~~~~~~~-
• Tighten the engine mounting adjust bolt to
specification with the pivot shaft wrench.
• Make sure that the flange on the engine
mounting adjust bolt contacts the engine.
Engine mounting adjust bolt
(front)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Pivot shaft wrench
90890-01485
Frame mount Insert wrench
YM-01485
7. Tighten:
• Engine mounting adjust bolts (rear) "2"