Installing The Fuel Tank - Yamaha FZ09E Service Manual

Fuel pump bolt
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
TIP ~~~~~~~~~~~~~~~
• Do not damage the installation surfaces of the
fuel tank when installing the fuel pump.
• Always use a new fuel pump gasket.
• Install the fuel pump gasket so that the lip side
turns to the inside of the fuel tank.
• Install the fuel pump as shown in the illustra-
tion.
• Align the projection "a" on the fuel pump with
the slot in the fuel pump bracket.
• Tighten the fuel pump bolts in the proper tight-
ening sequence as shown.
A. Forward
EA$1AC1104
INSTALLING THE FUEL TANK
1. Connect:
• Fuel hose (fuel tank side)
NOTICE
0
0
~~~~~~~~~~~~~
When installing the fuel hose, make sure that
it is securely connected , and that the fuel
hose connector co ver on the fuel hose is in
the correct position, otherwise the fuel hose
will
not be properly installed.
TIP ~~~~~~~~~~~~~~-
• Install the fuel hose securely onto the fuel
pump until a distinct "click" is heard.
• To install the fuel hose onto the fuel pump,
slide the fuel hose connector cover "1" on the
end of the hose in the direction of the arrow
shown.
• It is prohibited to wear the cotton work gloves
or equivalent coverings.
FUEL TANK
1
2.
Connect:
• Fuel tank breather hose
• Fuel tank drain hose
• Fuel pump coupler
7-4