Setting Functions (Set Mode); Area Sensing - Omron E3X-DA-N series Manual

Twin-output Models
4

Setting Functions (SET Mode)

Set mode selector to
SET.
SET
Digital incident level display
Setting the operating mode Changing the operating mode
The operating mode for the channel
set with the channel-selection switch
can be changed.
Changed using the channel-selection switch
Channel 1
L-ON
(Factory setting)
TEACH
D-ON
MODE
Sensing function
2 s
Standard
Super-long distance
Super-high speed
B A
● Area Sensing
Area sensing is possible using the threshold values
for channels 1 and 2.
• If channel 1 is set to L-ON, output turns ON when
the incident level is between the thresholds.
• If channel 1 is set to D-ON, output turns OFF
when the incident level is between the
thresholds.
The result is output to control output 1.
(Control output 2 is always OFF.)
http://www.ia.omron.com/
Teaching
CH1 CH2
Channel 2
L-ON
(Factory setting)
TEACH
D-ON
Displayed as "F."
(factory-set)
TEACH
TEACH
TEACH
Area
TEACH
Four types of sensitivity settings are available. Refer to page 22 for
details.
B A
MODE
Timer function
2 s
(Factory setting)
MODE
Flashing setting
2 s
OFF
MODE
2 s Hold setting
OFF
MODE
2 s Display orientation setting
Standard
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
E3X-DA-N
Displayed as "t."
TEACH Adjustable in 1-ms units
for 0 to 20 ms and in 5-ms
units for 25 ms or higher.
200
TEACH
Displayed as "L."
(factory-set)
TEACH
ON
TEACH
Displayed as "H."
(factory-set)
TEACH
Peak
TEACH
Bottom
TEACH
Reversing display
(factory-set)
TEACH
Reverse
TEACH
21